Onewheel GT Bumper Replacement

Written By: Justin Velasquez

Difficulty: Easy

Steps: 2

Time Required: 15 minutes

Introduction

If your Onewheel GT bumpers are worn down, broken, or you’re just ready for a new color, use this guide to swap them out and keep your investment protected!

For your safety, power off your Onewheel GT prior to disassembly. This reduces the risk of electrical malfunctions and/or damage during the replacement process.

Note: Altering or damaging any component of your Onewheel GT during disassembly/reassembly may render your existing warranty void or lead to refusal of non-warranty service at the discretion of Future Motion, Inc. (the creators of Onewheel).

Step 1   Remove the bottom bumper screws

  • Remove all ten (10) screws using a TP25 bit.
  • Note: Keep screws organized as they are easy to mix up and/or lose.

Step 2   Remove the bumpers

  • To remove the front bumper, pull it toward the nose of the Onewheel™.

© 2024 FixMyPEV ™  All Rights Reserved.